Avanti® J-30I Centrifuge with Elutriation System, 3-Phase, 50Hz, 220/380V


Enhanced performance compared to similar high speed or super speed centrifuges. New rotors enable forces of over 110,000g. Features include a high-torque SR Drive for the fastest acceleration and deceleration possible with gentle precision, automatic rotor identification and imbalance safety check, CFC-free refrigerants, and a friction reduction system. Compatible with all Beckman Coulter J rotors. System offers the fastest separations in the shortest time. Swinging-bucket and fixed-angle rotors provide maximum separation forces beyond 100,000 x g at speeds up to 30,000 rpm. Your productivity is ensured by unmatched accel/decel rates and an easy run set-up. Your sample spends more time at full force and less time in the centrifuge. Operates at near-Ultracentrifuge forces at over 100,000 x g for fast protein separations in the Avanti J-30I and the JA-30.50, the highest g-force fixed-angle rotor available in a high-performance centrifuge. Subcellular organelles are effectively separated by rate zonal centrifugation with the JS-24.38, a 6 x 38 mL swinging-bucket rotor. High Throughput: Four-liter batch throughput for bacteria and cell membrane isolation using the JLA-9.1000 J-LITE rotor at 16,800 x g. DNA sample preparation in up to 10 microplates with the JS-5.9 Rotor. Exclusive SR Drive technology offers the fastest accel and decel times. Low heat output and low energy consumption in a high efficiency machine.


Platform Avanti
Maximum Speed 30,000 rpm
Maximum g-Force 110,500.00|x g
BioSafe No
Acceleration 12 minutes
Deceleration 13 minutes
Speed Control 10 rpm of set speed or 0.15%, whichever is greater
Timed Run 1 min to 99:59 hrs; Hold or Ω 2t
Max Capacity Volume Range 1 - 4 L
Refrigeration System Non-CFC, non-ozone depleting refrigerant
Drive Type Cooling Air-cooled
Temperature Range(s) -20° to +40° C
Rotor ID Automatic
Friction Reduction System Yes
Zonal Capability Yes
Pollution Degree 2
Imbalance Tolerance ±
Environmental Conditions -20°C to 40°C in 1° increments
Installation Category II
Software Virtual Network Computing (VNC), Mobile Fuge app for Apple iOS and Android
Material(s) Steel, Structural Foam
Finish Powder Coat Paint
Weight 300 kg / 661.4 lb
Width 71 cm / 28 in
Depth 86 cm (102.0 cm with air direviter extending)
Height 86 cm (141 cm with door open)
Clearances 7.6 cm (sides) & 16 cm (rear)
Humidity Restrictions < 95% (non-condensing)
Power Requirements 220/380 VAC, 50 Hz, 3 Phase

Customers Also Viewed


The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.