13.5 mL, Open-Top Thinwall Polypropylene Tube, 16 x 76mm - 50Pk
Product No:326814
Thinwall Polypropylene Tubes
For use in Ultracentrifuge Rotors:
Type 90 Ti (Part Number 355530); Required Titanium Tube Cap Assembly: 341968
Type 70.1 Ti (Part Number 342184)
€267.40 List Price - €267.40
Resources + Tools
Spezifikationen
| Platform | Floor Prep |
| Nominal Size | 16 x 76mm |
| Nominal Capacity | 14 mL |
| Closure | Open-Top Thinwall |
| Package Quantity | 50 |
Related Products or Parts
13.4mm Diameter Cap Assembly Titanium Tube, Quantity of One
This accessory is required for the Ultra Clear Ultracentrifuge Tube (part # 344085, use with Red Silicone O-ring) and Thinwall Polypropylene Tube (part # 326814 use with Black Buna N O-ring)
Adapter for Tubes in Beckman Coulter Rotors for use in Ultracentrifuge Rotors:
Type 90 Ti (part # 355530)
Type 70.1 Ti (part # 342184)
MLA-55 (part #s A31459, 393203)
16mm Diameter Delrin Tube Adapter, Quantity of One
Adapter for Tubes in Beckman Coulter Rotors for use in Ultracentrifuge Rotors: Type 70 Ti (part # 337922), Type 50.2 Ti (part # 337901)
Required Adapter for Tubes:
13.5 mL Thinwall Polypropylene Centrifuge Tube, 16 x 76 mm; Required Cap/Spacer 330860 (part # 326814)
10-mL Thickwall Polypropylene Centrifuge Tube, 16 x 76 mm; Required Cap/Spacer 338907* (part # 355640)
10 mL Thickwall Polycarbonate Centrifuge Tube, 16 x 76 mm; Required Cap/Spacer 338907* (part # 355630)
13.5 mL Ultra-Clear Centrifuge Tube, 16 x 76 mm; Required Cap/Spacer 330860 (part # 344085)
*Caps are optional for these Thickwall tubes. In the Type 70 Ti, the filling level for 355640 and 355630 is 7.5 mL. In the Type 50.2 Ti, the filling level for 355640 and 355630 is 8 mL. Maximum speeds for these open-top tubes without a cap: Polycarbonate—45,000 RPM. Polypropylene—20,000 RPM. These speeds are those which the tubes could withstand when tested at 25°C for 24 hours. Further tests have shown that the polycarbonate tube can run at 50,000 RPM for four hours.
16mm Diameter Delrin Tube Adapter, Quantity of One
Adapter for Tubes in Beckman Coulter Rotors for use in Ultracentrifuge Rotors: Type 45 Ti (part # 339160), Type 70 Ti (part # 337922)
Required Adapter for Tubes: 13.5 mL Thinwall Polypropylene Ultracentrifuge Tube, 16 x 76 mm; Required Cap/Spacer 330860 (part # 326814)
10.0 mL Thickwall Polypropylene Ultracentrifuge Tube, 16 x 76 mm; Cap/Spacer 338907* (part # 355640)
10 mL Thickwall Polycarbonate Ultracentrifuge Tube, 16 x 76 mm; Cap/Spacer 338907* (part # 355630)
13.5 mL Thinwall Ultra-Clear Ultracentrifuge Tube, 16 x 76 mm; Required Cap/Spacer 330860 (part # 344085)
*Caps are optional for these Thickwall tubes. In the Type 45 Ti the filling level for 355640 and 355630, the filling level is 8 mL. Maximum speeds for these open-top tubes without a cap: Polycarbonate—30,000 RPM; Polypropylene—15,000 RPM.